當前位置：上海凱祥閥門有限公司>>中國臺灣317閥門>>安全閥SV-S69

安全閥SV-S69

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號SV-S69

品牌

廠商性質生產商

所在地

在線詢價收藏產品

聯系方式：陳小濤查看聯系方式

更新時間：2022-02-23 14:17:35瀏覽次數：282次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

  中國臺灣317閥門

暫無信息

上海凱祥閥門有限公司

經營模式：生產廠家

商鋪產品：479條

所在地區：上海

聯系人：陳小濤（經理）

詢價 給他留言

產品簡介

(SV-S69)BRONZESAFETYRELIEFVALVEMODEL:SV-S67/SVP-S67WITHOUTLEVERMODEL:SV-S69/SVP-S69WITHLEVERTheDisccanbereplacedwithPTFEforgoodeffectofanti-leakage

詳細介紹

(SV-S69) BRONZE SAFETY RELIEF VALVE

MODEL: SV-S67 / SVP-S67 WITHOUT LEVER

MODEL: SV-S69 / SVP-S69 WITH LEVER

The Disc can be replaced with PTFE for good effect of anti-leakage. (Model: SVP-S67, SVP-S69)

Spring: 1/2"~1": Steel or SUS304 1.1/4"~2": Steel.

When placing order, please indicate Working Pressure

Working Fluid : S67	Non-Corrosive Gas, Non-Corrosive Liquid, Air, Steam, Water, Oil.
Working Fluid : S69	Non-Corrosive Gas, Air, Steam.
Working Temp:	-45℃～185℃
Working Pressure:	SV-S67 / SV-S69 : 0.3 ~ 10 Kgf/cm²11 ~ 20 Kgf/cm² SVP-S67 / SVP-S69 (PTFE) 3 ~ 10 Kgf/cm²
Thread End:	BSPT (BS21), NPT (ANSI B2.1)

MATERIAL:
No./ Parts		W/O Lever	SV-S67	SVP-S67
No./ Parts		With Lever	SV-S69	SVP-S69
	Type :		METAL TO METAL	PTFE
1	Valve Seat		SUS304	SUS304
2	Valve Disc / Seal		FORGE BRASS	BRASS + PTFE
3	Valve spindle (Stem)		BRASS	BRASS
4	Valve Body		BRONZE	BRONZE
5	Spring Shoe		BsBM	BsBM
6	Adjusting Screw		BsBM	BsBM
7	Stop Nut		BsBM	BsBM
8	Cap		FORGE BRASS	FORGE BRASS
9	Lever (Type: S69)		STEEL	STEEL
10	Spring		SUS304 / STEEL	SUS304 / STEEL
11	Screw Washer		BsBM	BsBM
12	Hexagon Nut		BsBM	BsBM
13	Stop Bolt		BsBM	BsBM
14	Pin		BsBF	BsBF

This type of safety valve is characterized by regulating of pressure in valve rising and blowing-out when actuated and is the smallest and lightest valve, and also can be used in non-corrosive gases (air, oxygen, nitrogen, etc.) steam and liquids, such as water and oil. The sizes shown in the chart are subject to change without notice.

Nominal Diameter	Valve Seat Diameter D	Lift l	Effective Area mm²			L1 E	L2 F	Fitting Screw		Closed Type		Lever Type
Nominal Diameter	Valve Seat Diameter D	Lift l	2.22Dl	πD l	0.785D²	L1 E	L2 F	Inlet d1	Outlet d2	A mm	Weight	A1 mm	Weight
12	12	0.52	13.32	18.84	113.0	29	50	PT 1/2	PF 1/2	138	0.52	161	0.59
19	19	0.76	32.05	45.36	283.3	36	58	PT 3/4	PF 3/4	150	0.66	172	0.74
25	25	1.00	55.50	78.53	490.6	40	70	PT 1	PF 1	180	1.09	202	1.19
32	32	1.28	90.93	128.67	803.8	50	82	PT 1.1/4	PF 1.1/4	206	1.90	222	1.94
38	38	1.52	128.22	181.45	1133.5	54	93	PT 1.1/2	PF 1.1/2	231	2.35	246	2.39
50	50	2.00	222.00	314.15	1962.5	67	102	PT 2	PF 2	265	3.85	282	4.11